|
Integral mandrel sleeve stabilizers are made in two parts: One mandrel and one sleeve. The assembled by screwing the sleeve on the body and tightening these on the shoulder. The sleeve has been engineered to avoid any accidental unscrewing as to be easily replaced on rig.Integral mandrel sleeve stabilizers are made in two parts: One mandrel and one sleeve. The assembled by screwing the sleeve on the body and tightening these on the shoulder. The sleeve has been engineered to avoid any accidental unscrewing as to be easily replaced on rig.
|
WORKING OD
inch (mm) |
FISHING OD
inch (mm) |
UP CONN. |
DOWN CONN. |
I.D.
inch (mm) |
FISHING LENGTH
inch (mm) |
OAL
inch (mm) |
|
28 (711.2) |
9-1/2 (241.3) |
7-5/8REG |
7-5/8REG |
3 (76.2) |
27 (686) |
78 (1981) |
|
26 (660.4) |
9-1/2 (241.3) |
7-5/8REG |
7-5/8REG |
3 (76.2) |
26 (660) |
76 (1930) |
|
22 (558.8) |
9-1/2 (241.3) |
7-5/8REG |
7-5/8REG |
3 (76.2) |
26 (660) |
76 (1930) |
|
17-1/2 (444.5) |
9-1/2 (241.3) |
7-5/8REG |
7-5/8REG |
3 (76.2) |
27 (686) |
67 (1702) |
|
12-1/4 (311.1) |
8 (203.2) |
6-5/8REG |
6-5/8REG |
2-13/16 (71.4) |
24 (610) |
61 (1550) |
|
8-1/2 (215.9) |
6-1/2 (165.1) |
NC50 |
4-1/2REG |
2-13/16 (71.4) |
27 (686) |
66 (1676) |
|
6 (152.4) |
4-3/4 (120.7) |
NC38 |
3-1/2REG |
2 (50.8) |
27 (686) |
58 (1473) |
|
5-7/8 (149.2) |
4-3/4 (120.7) |
NC38 |
3-1/2REG |
2 (50.8) |
22 (559) |
54 (1372) |
|
չ 32090302000302
